Snap SANbloc S50

Product Description

Universal scalability for Snap Server 520, 550, 650, 4500, 18000

The Adaptec SANbloc S50 JBOD is the simplest way to integrate the performance, reliability, and cost-effectiveness of Serial Attached SCSI (SAS) into your storage strategy. Whether you are creating or scaling your storage solution, the Adaptec S50 enables you to scale to multiple terabytes of data capacity. Use low-cost Serial ATA (SATA) or high-performance SAS drives to achieve the right balance of performance and cost.

The SANbloc S50 is perfect for data- and transaction-intensive applications. Dual SAS host connections transfer terabytes of data at speeds up to 1200MB/s each, for an aggregate bandwidth of 2400MB/s..

Benefits

 2400MB/s bandwidth in a redundant system
 Choose SAS or SATA drives to balance performance, reliability and cost
 Meet growing data demands with 6TB of SATA storage or 3.6TB of SAS storage
 Point-to-point connectivity isolates drive failures, increasing reliability and performance

Technical Specifications

Customer Needs

High availability, exceptional scalability and superior performance for high-bandwidth applications.

Benefits

Ability to use SAS and SATA drives to achieve the right performance, reliability, and price.

Key Differentiators

Point-to-point connectivity isolates drive failures, increasing reliability, and fault tolerance and improves performance.
Meet your growing data demands with your choice of 6TB of SATA storage or 3.6TB of SAS storage

Maximum Capacity

SATA: Up to 12 drives (6TB) capacity per 2U enclosure
SAS: Up to 12 drives (3.6TB) capacity per 2U enclosure

Hot Swappable and Redundant Components

Two advanced power and cooling modules (APC)
Two independent AC power inlets
Up to 12 drives
No active components on data path

Disk Drive Interface

Twelve independent 300MB/s point-to-point connections to each SAS or SATA disk drive

Disk Drives

Capacity: Up to 500GB
Rotational velocity: 7200 RPM, 10K RPM, 15K RPM
Interface: 3Gb SAS; 3Gb/1.5Gb SATA
Form factor: 3.5in. form factor, 1.0in. height

Host Interface

One SAS I/O module supports two SAS connections
SAS connections can be used for host connections or as a combination of host connection and expansion
Each SAS connection supports up to 1,200MB/s

Measured Performance

Up to 750MB/s (sustained reads)

I/O Module Features

Single controller
SAS and SATA support
Autonegotiate speeds
Inband and out-of-band management
SMP and SSP command/protocol support
Redundant cable support

Maximum SAS Cable Length

Up to 6m

Monitoring

Temperature, advanced power and cooling modules including fan speed control, disk drives, and I/O module, as well as error rates and quality of service on each PHY.

Failure Notification

SCSI enclosure services (SES-2) over I2C physical interface, LEDs, audible alarms, FRU (field replaceable unit) revision and serial number reporting, events reported to storage management software.

AC Power

Input voltage: Autoranging, 85-264 VAC
Input frequency: 47-63 Hz
Power factor correction: Per EN61000-3-2
Input current: 100-240 VAC @ 4-2.5 A
Output power: 491 W peak, 430 W average

Height

3.5 inches (89mm)

Width

17.6 inches (447mm)

Depth

19.5 inches (495.3mm)

Weight with Drives

60 lbs (27 kg) max

Warranty

3-year system warranty

If you require pricing or information please complete our information form or email sales

Tel: +44 (0)1256 782030 : 08704 286186